Lexmark Multifunction Laser C78x - User's Guide - Page 73
Installing and removing options, Accessing the printer system board
View all Lexmark Multifunction Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
9 Installing and removing options CAUTION: If you are installing memory or option cards sometime after setting up the printer, turn the printer off, and unplug the power cord from the wall outlet before continuing. The instructions in this section help you install the interface card, memory card, and firmware card. Information about other memory or option cards can be found in the printer User's Guide. Accessing the printer system board You must access the printer system board to install the interface card, memory card, and firmware card. Note: Use a Phillips screwdriver to remove the system board access cover. 1 Locate the system board access cover on the back of the printer. 2 Remove the four access cover screws. 3 Remove the access cover. 4 Set the cover aside. Use the illustration to locate the connector for the card you want to install. Option card Firmware and flash memory cards Memory card connector Installing and removing options 73