Lexmark Network Printer Device Setup Sheet

Lexmark Network Printer Device Manual

Get Lexmark Network Printer Device PDF manuals and user guides View all Lexmark Network Printer Device manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark Network Printer Device manual content summary:

  • Lexmark Network Printer Device | Setup Sheet - Page 1
    from your computer and attach it to your printer. After your printer is connected, use the drivers or printer software CD that came with your printer to install your printer on your wireless network (this will require selecting the network path when running the CD). Before setting up your wireless
  • Lexmark Network Printer Device | Setup Sheet - Page 2
    instructions on screen, disconnect the USB cable from your computer and the print server. Turn the cable around and use it to connect the print server to your printer and run the printer drivers or printer software CD that came with your printer. Follow the Network printer install path to complete
  • 1
  • 2
3
About the setup process
Read all instructions before proceeding with setup.
Before your printer can be connected to your wireless network, the print server must first
be configured for use on the network by connecting it to your computer and running the
N4050e Setup Utility CD.
Once the print server is configured, you must disconnect the print server from your
computer and attach it to your printer. After your printer is connected, use the drivers or
printer software CD that came with your printer to install your printer on your wireless
network (this will require selecting the network path when running the CD).
Note:
Refer to the N4050e User’s Guide on the Setup Utility CD for alternate setup
information when installing the print server with third party printers.
Before setting up your wireless print server, make sure your printer has been set up
correctly.
•
The toner or print cartridges are installed.
•
Paper is loaded.
•
Your printer is plugged in and powered on.
•
Your printer is ready to be installed.
For help setting up your printer, refer to your printer’s documentation.
1
N4050e
2
Connect the print server to your computer USB port using the USB cable.
Insert the N4050e Setup Utility CD, install the software, and run the Wireless
Setup Wizard.
Safety Information
•
Use only the power supply provided with this product or the manufacturer
’s authorized replacement power supply.
•
Connect the power cord to a properly grounded electrical outlet tha
t is near the product and easily accessible.
•
Refer service or repairs, other than those described in the user d
ocumentation, to a professional service person.
CAUTION:
Do not set up this product or make any electrical or cabling co
nnections during a lightning storm.
Federal Communications Commission (FCC) Information
This device complies with Part 15 of the FCC rules. Refer to the
User’s Guide
on the
N4050e Setup Utility
CD for more information.
P/N 14T0109
E.C. 5D0006
© 2004 Lexmark International, Inc. All rights reserved.
www.lexmark.com
*14T0109*