Lexmark Optra E310 User's Guide - Page 16
Using a USB cable, When the Add New Hardware Wizard screen - printer driver
View all Lexmark Optra E310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Using a USB cable If you are connecting your printer to a PC with a USB (Universal Serial Bus) cable, follow the instructions below. 1 Make sure your computer and printer are turned off. 2 Connect the USB cable to the port on the back of your computer. 3 Connect the other end of the cable to the USB port on the back of your printer. 4 Turn on your computer and your printer. 5 When the Add New Hardware Wizard screen appears: a Select Next to begin searching for new drivers. b Select Next to search for best driver. c At the next screen, deselect the floppy disk drives box and Microsoft Windows update box and select the Specify Location box. d Insert the CD that came with your printer, then select Browse. e Select the letter of your CD drive and highlight the Win98USB folder. f Select OK, Next, Next. g When the hardware is loaded, click Finish. The CD is automatically launched. 6 Follow the installation instructions on the printer drivers screen. 7 Select the LPT1 port as your default printer port. 8 When you are finished, exit the CD. 9 Restart your computer. 6 Chapter 1: The basics