Lexmark Optra M410 User's Guide - Page 225
Attaching a Hard Disk to the Adapter Card, Align the connector pins on the end of the hard
View all Lexmark Optra M410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
Adapter Card Hard Disk You can purchase: • A hard disk with an adapter card already installed. • A hard disk that supports Optra FormsTM with an adapter card already installed. Refer to Optra Forms for more information. • A hard disk adapter card for installing a separately purchased hard disk. Complete the following instructions to attach the hard disk to the adapter card. If your disk is already attached to a card, go to "Accessing the Printer System Board" on page 201. Attaching a Hard Disk to the Adapter Card You can use the adapter card with any hard disk meeting the following criteria: • 2.5-inch platter • ATA-2 (IDE) interface • Maximum thickness of 15 mm (.59 in.) To attach the hard disk to the adapter card: 1 Align the connector pins on the end of the hard disk with the connector on the back of the adapter card. Understanding Option Cards 213