Lexmark Optra N model 245 Network Scan Drivers - Page 10
Scanning both sides of a Using scanimage, Using OpenOffice.org
View all Lexmark Optra N model 245 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3 Place your document in the ADF or on the scanner glass. 4 From the printer control panel, select your scan job. Using XSane versions earlier than .99 1 From the toolbar, navigate to: Preferences > Setup > select Enhancement tab > Scan Multiple Page 2 From the dialog, click Scan. 3 Place your document in the ADF or on the scanner glass. 4 From the printer control panel, select your scan job. 5 Repeat step 2 until all the pages of your document are displayed on your computer. Scanning both sides of a page Notes: • Make sure that your printer has a duplex scanner and an Automatic Document Feeder (ADF). • Make sure you place your document in the ADF. • The duplex scanner and ADF are available only in select models. You can scan both sides of the page in several ways depending on the application. Using scanimage 1 Open a terminal window, and then type scanimage -b --scan-both-sides=yes -d [device_name]. Press Enter. 2 Place your document in the ADF. 3 From the printer control panel, select your scan job. Using scanadf 1 Open a terminal window, and then type scanadf --scan-both-sides=yes -d [device_name]. Press Enter. 2 Place your document in the ADF. 3 From the printer control panel, select your scan job. Using OpenOffice.org Note: You may use Writer, Calc, Impress, or Draw only. 1 From an OpenOffice.org application toolbar, do either of the following: • Click Insert > Picture > Scan > Select Source. • Click Insert > Graphics > Scan > Select Source. 2 From the "Device Used" menu, select your printer. Scanning 10