Lexmark Optra Rt plus Card Stock & Label Guide - Page 62
Lexmark E230, E232, E234(n), E330, and E332n
View all Lexmark Optra Rt plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Lexmark E230, E232, E234(n), E330, and E332n Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E230, E232, E234(n), E330, and E332n support paper and label stock from 60-90 g/m2 (24 lb) and card stock up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 50 sheets of paper labels. The following table lists the maximum weights supported by Tray 1 and the manual sheet feeder. Overview of card stock and label support Paper source Tray 1 Manual feed Index Bristol - 163 g/m2 Card stock Tag - 163 g/m2 Cover - - Labels Paper 90 g/m2 90 g/m2 Vinyl - - For paper and transparency specifications, see the Lexmark E230/E232/E234(n)/E330/E332n Publications CDs. Media specifications Labels Width: 210-216 mm (8.3-8.5 in.) Length: 279-297 mm (11-11.7 in.) Weight: Up to 90 g/m2 (24 lb) Thickness: Up to 0.25 mm (0.01 in.) Smoothness: 100-400* Sheffield *150-250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation. Card stock Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Note: To minimize curl, use the rear exit when printing on card stock and labels. For more information, see "Maintenance procedures" on page 13. Printer specifications 62