Lexmark Optra Rx Card Stock & Label Guide - Page 65
Lexmark E260, E260d, and E462dtn, For more information, see Maintenance procedures
View all Lexmark Optra Rx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Lexmark E260, E260d, E260dn, E360d, E360dn, E460dn, E460dw, and E462dtn Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The printer supports paper and label stock from 60-90 g/m2 and index card stock up to 163 g/m2 (43 lb). You can load up to 50 label sheets in Tray 1. Card stock must be sent through the manual feeder one sheet at a time. The following table lists the maximum weights supported by Tray 1, Tray 2, and the manual sheet feeder. Overview of card stock and label support Paper source Tray 1 Index Bristol - Card Stock Tag - Tray 2 - - Manual Feed 163 g/m2 Card stock should be grain short and set to exit the rear door. 163 g/m2 For paper and transparency specifications, see the printer publications CD. Cover - - - Labels Paper 90 g/m2 90 g/m2 90 g/m2 Media specifications Labels Width: 210-216 mm (8.3-8.5 in.) Length: 279-297 mm (11-11.7 in.) Weight: Up to 90 g/m2 (24 lb) Thickness: Up to 0.25 mm (0.01 in.) Smoothness: 100-200* Sheffield *150-200 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation. Card stock Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Note: To minimize curl, use the rear exit when printing on card stock and labels. For more information, see "Maintenance procedures" on page 13. Printer specifications 65