Lexmark Optra S 1250 User's Guide (7.1 MB) - Page 153
also recommended as part of the label design. For a letter size sheet, in portrait orientation
View all Lexmark Optra S 1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Using Your Printer especially through the backing material. Die-cuts should be at least 1 mm (0.04 in.) from printed areas. Back slits or pop-out windows are not recommended. A non-print area (waste strip) around the outer edge of the sheet is also recommended as part of the label design. For a letter size sheet in portrait orientation, allow 8.38 mm (0.33 in.) for the non-print area along the top and bottom edges. Allow 6.35 mm (0.25 in.) for the non-print area along both sides. Liner Edge Stripped Edge 3 mm (0.125 in.) 3 mm Leading Edge (0.125 in.) Driver's Edge Non-Print Area 8.38 mm (0.33 in.) Using Print Materials 8.38 mm (0.33 in.) Non-Print Area 6.35 mm (0.25 in.) Non-Print Area 6.35 mm (0.25 in.) Non-Print Area (Not drawn to scale) Using Print Materials 137