Lexmark Optra S 1255 User's Guide (7.1 MB) - Page 318
See Closing the Printer System Board on
![]() |
View all Lexmark Optra S 1255 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 318 highlights
Memory and Option Cards Installing Options 4 Make sure both metal clips on the connector are fastened and the two pins on the connector are pushed through the holes on the memory option. 5 If you are installing a second memory option, repeat steps 1 to 4, installing it in memory connector 2. 6 If you need to install another option on the system board: - See "Flash Memory Option" on page 304. - See "Option Cards" on page 308. 7 See "Closing the Printer System Board" on page 297 to reattach the shield and side door. Note: To verify that the option is installed properly, see "Verifying the Installation of Options" on page 325. 302 Memory and Option Cards
![](/manual_guide/products/lexmark-optra-s-users-guide-71-mb-5e716f5/318.png)
Memory and Option Cards
302
Memory and Option Cards
Installing Options
4
Make sure both metal clips on the connector are fastened
and the two pins on the connector are pushed through the
holes on the memory option.
5
If you are installing a second memory option, repeat steps
1 to 4, installing it in memory connector 2.
6
If you need to install another option on the system board:
-
See “Flash Memory Option” on page 304.
-
See “Option Cards” on page 308.
7
See “Closing the Printer System Board” on page 297 to
reattach the shield and side door.
Note:
To verify that the option is installed properly, see “Verifying
the Installation of Options” on page 325.