Lexmark Optra S 1650 Card Stock & Label Guide - Page 150
Glossary, Basis weight
View all Lexmark Optra S 1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Glossary Adhesive contamination Anvil cuts Auto compensator Back splits Backup roll contamination Basis weight Beam strength Butt cut Calendering Clipping Conversion Converters Corner buckler Curl Cut sheet Debossing Delamination Die-cut Migration of adhesive away from a label, which can cause printer contamination. Also known as glue contamination. Cuts that penetrate both the face stock and the liner of a label. A gear-driven pick arm suspended by a counterbalance spring that allows the printer to automatically adjust the pick force necessary for different types of print materials. Also known as back slits or liner cuts. Cuts through the backside of the liner. Back slits increase the potential for adhesive contamination. Toner contamination of the fuser's backup roll. Particularly applies to vinyl, plastic, and paper labels. Slick backings are harder to feed and increase toner buildup in the fuser. Weight in pounds of a specific number of sheets of paper or stock in a standard size for that particular material. Also known as column strength. Refers to how well the material is able to support itself and remain flat and straight during the printing process. Cut flush to one another, with no extra area between. This cut does not extend through the liner. Butt cut labels may or may not have an edge matrix removed. The process of moving paper through metal rolls during manufacturing to smooth and gloss the surface of the paper. Also known as buckler damage. A notching or slight folding of the corner of the stock placed under the corner buckler of the paper tray. The process that turns base stock into cut-sheet products designed for specific applications. Conversion includes cutting the base stock to size, perforating the stock, die-cutting, and applying inks and topcoats. Print material suppliers who take the base stock from the manufacturer and convert it into cut sheet products. The metal tab at the corner of a paper tray that helps the printer separate one sheet of paper from the stack during the pick process. Waviness or curvature at the edge of the material that is generally moisture related. Single piece (page) of paper or label stock. Process of pressing an image down into the surface of the label or card stock. See "Embossing" on page 151. The peeling of labels off the backing during the printing process. Labels: Cut of material (face stock) to form individual labels on sheet. Cuts do not penetrate the liner. Card Stock: Cuts made with dies to create the shapes wanted in the stock. Cuts may or may not go completely through the stock. See "Ties" on page 152. Glossary 150