Lexmark Optra Se 3455 User's Guide (7.1 MB) - Page 276
to take you to the, status message.
View all Lexmark Optra Se 3455 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
Optional Drawers Installing Options 14 Plug in the printer power cord. 15 Turn the printer power On (|). Note: Verify that the optional drawer is installed properly. See "Verifying the Installation of Options" on page 325. 16 From the operator panel, set the PAPER TYPE menu setting for each paper source. Note: The 250-sheet input tray in the printer is Tray 1. Trays for support units installed under the printer are numbered Tray 2 down to Tray 5 depending on the number of optional drawers installed. For more information, see "Paper Sources" on page 140 and "Attaching the Decals" on page 11. 17 Press Go to take you to the Ready status message. 260 Optional Drawers
Optional Drawers
260
Optional Drawers
Installing Options
14
Plug in the printer power cord.
15
Turn the printer power On (|).
Note:
Verify that the optional drawer is installed properly.
See “Verifying the Installation of Options” on
page 325.
16
From the operator panel, set the PAPER TYPE menu
setting for each paper source.
Note:
The 250-sheet input tray in the printer is Tray 1.
Trays for support units installed under the printer
are numbered Tray 2 down to Tray 5 depending on
the number of optional drawers installed. For more
information, see “Paper Sources” on page 140 and
“Attaching the Decals” on page 11.
17
Press
Go
to take you to the
Ready
status message.