Lexmark Optra Se 3455 Service Manual - Page 89
Removal Procedures, Covers, Right Cover Removal
View all Lexmark Optra Se 3455 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
4049-XXX Removal Procedures When there is artwork to support a procedure, it follows the text. Covers Right Cover Removal 1. Turn the printer off. 2. Remove all external trays. 3. Open the top cover. 4. Depress the latch and open the right cover. 5. Remove the E-clip from the rear pivot pin and lift the cover off the rear pivot pin. Front Cover Removal 1. Unplug the power cord. 2. Remove the paper tray. 3. Open the top cover. 4. Open the right cover. 5. Release the latches [B]. You can reach the lower latches through the paper tray opening. 6. Lift the right side of the cover to disengage the latch [D]. 7. Slide the cover to the right to disengage the bracket from the posts. 8. Pull the front cover forward and disconnect the ground strap from the frame on the left side. Repair Information 4-10