Lexmark Optra T Technical Reference - Page 306
Setting Up the Communications Port Using Windows N
View all Lexmark Optra T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 306 highlights
8-3 Interfaces 11 Click OK. 12 Close all windows now that the port is set up. Setting Up the Communications Port Using Windows NT 4.0 In your Windows NT 4.0 application: 1 On the Menu bar, click Start. 2 Click Settings. 3 Click Control Panel. The Control Panel screen displays. 4 Double-click the Ports icon. The Ports screen displays. 5 Select the communications port you want to configure. 6 Click the Settings button. The Settings screen for this specific port displays. For example, if you select the COM1 port, then the Settings for COM1 screen displays. 7 Fill out the fields for the following printer settings to make them match your printer settings: • Baud Rate • Parity • Stop bits • Flow Control Note: For Flow Control, select Hardware if you want DTR protocol or Xon/Xoff for Xon/Xoff protocol. 8 Click OK. 9 Close all screens now that the port is set up.