Lexmark Optra T614 Technical Reference - Page 61
Table 2-31: Raster Graphics, Transfer Raster Data by Plane
View all Lexmark Optra T614 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
2-50 PCL Table 2-31: Raster Graphics Command / Parameters ESC*t#R 75 100 150 200 300 600 1200 75 dpi 100 dpi 150 dpi 200 dpi 300 dpi 600 dpi 1200 dpi ESC*r#F 0 Rotate with print 3 Fixed (Default) ESC*r#S # = Number of Input Pixels ESC*r#T # = Number of Raster Lines ESC*r#A 0 Left Graphics Margin at 0 (Default) 1 Current Cursor Position 2 At logical left page limit with scaling On 3 At current cursor position with scaling On ESC*b#V[data] # = Number of Data Bytes ESC*b#Y # = Number of Raster Lines Function / Result Raster Resolution Note: 200 dpi is only supported when the printer is operating in 600 dpi or 1200 dpi mode. Raster Graphics Presentation Sets the Raster Image Orientation in relation to the logical page. Raster Width (Source) Sets width of clip window for raster graphics. Raster Height (Source) Sets height of clip window for raster graphics. Start Raster Graphics Sets the left margin for raster graphics. Transfer Raster Data by Plane This command is used when the raster data is encoded by plane as specified by the Simple Color command or the Configure Image Data command. The command sends each plane in the row except the last. Y Offset Moves cursor position down by the specified number of raster lines.