Lexmark Optra T616 Administrator's Guide (1.4 MB) - Page 54
Job Accounting, Job Buffer Size, Defective Disk, Job Acct Limit, Job Buffer, Disabled
View all Lexmark Optra T616 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Setup Menu (continued) Menu item Values Job Accounting Off* On If you have an optional disk installed in your printer, set Job Accounting to On to use the disk to store statistical information about your most recent print jobs. The statistics include whether the job printed with or without errors, the time required to print the job, the size (in bytes) of the job, the requested paper size and paper type, the total number of printed pages and the number of copies requested. Job Accounting only displays if the hard disk is not defective, Read/Write or Write protected or if Job Buffer Size is set to 100%. 61 Defective Disk displays during printer power on. See "61 Defective Disk" on page 112. If your printer has a hard disk installed, it is capable of compiling print job statistics and storing them to disk. You may print these statistics. See "Job Acct Stat" on page 36. Job Acct Limit Disabled 10...1000 (1000*) The Job Acct Limit menu item does not display if the hard disk is defective, Read/Write or Write protected, or if Job Buffer Size is set to 100%. 61 Defective Disk displays during printer power on. See "61 Defective Disk" on page 112. The Job Acct Limit menu item specifies the number of print jobs for which statistics are maintained on your printer hard disk. For example, if you set the limit to 10, the statistics from the 10 most recent print jobs are stored to disk. When the limit is reached, the oldest print job statistics are discarded and replaced with the statistics from the print job currently being printed. The number of jobs contained in the statistics data never exceeds the Job Accounting Limit. Note: When Job Acct Limit is set to Disabled, print job statistics are stored for each print job until the hard disk is full. When the Job Accounting Limit is modified, all print job statistics currently stored on the hard disk are cleared. *Factory default Using the Operator Panel and Menus 54