Lexmark Optra T616 User's Guide (2 MB) - Page 58
push the stack in too far., Slide the paper width guide to the left until it lightly touches
![]() |
View all Lexmark Optra T616 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
6 Slide the print material into the multipurpose feeder as far as it will go. Do not force it. Forcing causes buckling of the print material. 7 Make sure you have not loaded too much print material. The stack should fit loosely under the stack height limiter. The print material buckles if you load a stack that is too deep or push the stack in too far. 8 Slide the paper width guide to the left until it lightly touches the stack of print material. Do not bend the print material. Loading Print Materials 58
![](/manual_guide/products/lexmark-optra-t-users-guide-2-mb-7376690/58.png)
58
Loading Print Materials
6
Slide the print material into the multipurpose feeder as far as it
will go. Do not force it. Forcing causes buckling of the print
material.
7
Make sure you have not loaded too much print material. The
stack should fit loosely under the stack height limiter. The
print material buckles if you load a stack that is too deep or
push the stack in too far.
8
Slide the paper width guide to the left until it lightly touches
the stack of print material.
Do not
bend the print material.