Lexmark T520 Service Manual - Page 128
Smart Contact Assembly Service Check
UPC - 734646620000
View all Lexmark T520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
4520-xxx Smart Contact Assembly Service Check Note: If you are unable to clear a "32-Unsupported Cartridge" User Error Message, be sure a Lexmark 4520 print cartridge is correctly installed in the printer. The cartridge is easily identified by the contact board on the right side rear of the cartridge. Install another print cartridge before attempting to troubleshoot the printer. Check to make sure the smart cable is properly connected to J21 on the engine board. Check the print cartridge for any signs of damage or improper installation of the smart chip. Also, be sure there is proper contact between the smart chip on the cartridge, and the smart contact assembly. Service Tip: An intermittent "32-Unsupported Cartridge" User Error Message can be caused by poor contact between the smart cartridge contacts in the upper front cover and the smart chip. Also check for proper seating of the smart cartridge cable to the engine board. FRU 1 Smart Contact Assembly Engine Board Action Check the voltage on the smart cartridge contact. The voltage measures approximately +3.8 V dc when not writing data to the system board. If data is being written, the voltage measures approximately 0 V dc. If incorrect, disconnect the cable from J21 on the engine board and check the voltage on J21-1. The voltage measures approximately +5 V dc. • If incorrect, replace the engine board. • If correct, replace the smart cartridge contact assembly. 2-100 Service Manual