Lexmark T620 Service Manual - Page 30

4069-5XX/7XX Service Error Codes Service Error Codes are generally non-recoverable except in an intermittent condition when you can POR the printer to temporarily recover from the error condition. Error Code Action 900 RIP Software Contact the next support level or call Lexmark. 901 Engine Flash Indicates that the flash which the engine code is programmed into is bad. Replace the system board. 902 General These errors indicate an unrecoverable engine software Engine Software error. Replace the system board. 903 Paperport Link Driver Error 904 Interface Violation by the controller software Check for correct location of the jumpers on the interconnect board for the model/type printer you are servicing. Incorrect jumper settings can cause a 902 service error. If jumpers are set correctly, replace the system board. 905 Interface Violation by Paperport Device 906 ControllerEngine Link Driver Error 910 DC Pick Motor DC Pick Motor Stall 911 DC Pick Motor Excessive PWM Error Codes 910,911,912,913 and 914 are indications that a Tray 1 paper feed problem has been detected. Go to the "Input Tray(s) Option Service Check" on page 2-69. 912 DC Pick Motor below speed 913 DC Pick Motor over speed 2-2 Service Manual