Lexmark T630 Technical Reference - Page 95
Table 2-38, Status Readback, Set Status Readback Location Type, Inquire Status Readback Entity
UPC - 734646385756
View all Lexmark T630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
2-83 PCL Table 2-38: Status Readback Command / Parameters ESC*s#T 0 Invalid location (Default) 1 Use currently selected location 2 All locations 3 Internal (resident) 4 Downloaded entity 5 Cartridge 7 User-installable flash 200 Disk ESC*s#U 0 All 1 If download, temporary; otherwise, highest priority 2 If download, permanent; otherwise, next higher priority ESC*s#I 0 1 2 3 4 ESC*s1M Font Macro User-defined pattern Symbol set (for unbound scalable fonts) Font extended ESC&r#F 0 Flush all complete pages 1 Flush all pages ESC*s#X -32767 to 32767 Default = 0 Function / Result Set Status Readback Location Type Sets the status location type to the specified value. The 5 value for Cartridge may be specified, but since your printer does not support font cards or cartridges, the command is ignored. The 7 value for User-installable flash is only valid when flash memory is installed. The 200 value is only valid when a hard disk is installed. Set Status Readback Location Unit Sets the status location unit to the specified value. The location unit is used along with the location type to identify a location for the Inquire Status Readback Entity command. Note: The unit value is interpreted differently, depending on the location type specified. Inquire Status Readback Entity Returns the requested information set by Set Status Readback Location Type and Set Status Readback Location Unit. Free Space Returns the total available memory and the largest available block of memory. Flush All Pages Holds print jobs in the print buffer until the current job finishes printing. Echo Returns # back to host computer.