Lexmark T630n Technical Reference - Page 191
LPRINT Commands Information s, LESCAPECHAR Command
UPC - 734646532211
View all Lexmark T630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
3-83 PJL LPRINT Commands (Information Pages) Use these commands to print one of the internal information pages. @PJL testpage[] The supported testpage values are listed in the following table. Table 3-20: LPRINT testpage Commands testpage Value LPRINTDIRECTORY LPRINTTESTPAGE LPRINTMENUS LPRINTPCLFONTS LPRINTPSFONTS Description Prints both the flash and disk directory listings. If neither flash memory or a disk is installed, the command is ignored. Prints the test page. Prints the menu settings page. Prints the PCL font listing. Prints the PostScript font listing. For example, to print a menu settings page: Syntax: @PJL LPRINTMENUS[] LESCAPECHAR Command This command modifies the code point of the escape character for the host computer specified by the PORT parameter. The escape character is mapped to code point 0x1B for each host interface port. Syntax: @PJL LESCAPECHAR CHAR=byte PORT=port [] CHAR parameter The byte value for the CHAR parameter is the code point of the ASCII character used for the escape character. For example, at the factory, the printer uses 0x1B (character ) for the escape character. If CHAR = 65 is specified with this command, the printer uses 0x41 (character 'A') as the escape character for the host interface port specified via the PORT parameter.