Lexmark T632dtn Setup Guide - Page 32
Installing a 5-bin mailbox, be installed directly
UPC - 734646538404
View all Lexmark T632dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing a 5-bin mailbox Warning: The 5-bin mailbox is designed to hold the weight of print media only. Do not use it as a shelf; excess weight may damage it. Labels The 5-bin mailbox is shipped with a sheet of labels and a plastic bracket for attaching a wire bail. After you carefully unpack the mailbox, install it immediately; otherwise, the edges of the mounting brackets could damage tabletops or fabrics. Bracket Note: The 5-bin mailbox cannot be used with a T630. If you have purchased a finisher, it must be installed directly on the printer, before the mailbox. 1 Remove the top cover from the printer, finisher, output expander, or previously installed mailbox. Set up the printer and print media handling options 27
27
Set up the printer and print media handling options
Installing a 5-bin mailbox
The 5-bin mailbox is shipped with a sheet
of labels and a plastic bracket for
attaching a wire bail.
Warning:
The 5-bin mailbox is designed to hold the
weight of print media only. Do not use it as a shelf; excess
weight may damage it.
After you carefully unpack the mailbox,
install it immediately; otherwise, the
edges of the mounting brackets could
damage tabletops or fabrics.
Note:
The 5-bin mailbox cannot be used with a T630. If
you have purchased a finisher, it
must
be installed directly
on the printer, before the mailbox.
1
Remove the top cover from the
printer, finisher, output expander,
or previously installed mailbox.
Labels
Bracket