Lexmark W820n User's Guide - Page 295
ReadyHex, Reattach <device>, Release Surface L
UPC - 734646210515
View all Lexmark W820n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 295 highlights
Ready Hex What this message means: The printer is in Hex Trace mode and is ready to receive and process print jobs. What you can do: • Send a job to print. All data sent to the printer is printed in hexadecimal and character representation. Control strings are printed, not executed. • Turn the printer off and then on to exit Hex Trace mode and return to Ready status. Reattach What this message means: The specified device, the multipurpose feeder or the envelope feeder, is either not fully connected to the printer or is experiencing a hardware failure. What you can do: • Reestablish communication by removing the specified device and reattaching it to the printer. • If hardware fails, turn the printer off and back on. If the error recurs, turn the printer off, remove the specified device, and call for service. See also: Setup Guide; Calling for service Release Surface L What this message means: Surface L, the green tab located between the two finisher bins, is up. What you can do: Release Surface L to clear the message. Look for a label on the printer to help you locate Surface L. See also: Message maps 293