Lexmark WinWriter 100 Service Manual - Page 33
Adjustments, Bi-directional Alignment Adjustment
View all Lexmark WinWriter 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
4076-0WJ • Be extra careful in working with ESD-sensitive parts when cold- weather heating is used because low humidity increases static electricity. Adjustments Bi-directional Alignment Adjustment The bi-directional alignment can be checked by printing a test page. The adjustment is correct when the vertical bars appear straight. To adjust the bi-directional alignment: 1. Attach the printer to a PC operating in DOS. 2. Load paper in the Auto Sheet Feed. 3. Place the 4076 OWJ Service Diskette in the diskette drive. Type the letter of the drive, colon, and adjust. For example; a:adjust. 4. A page loads and the bi-directional alignment pattern prints. The pattern consists of three lines of vertical bars. The bars are aligned when the adjustment is correct. The following sample requires the center vertical bars to be moved to the right. 5. Follow the directions on the menu and move the center bar to line up with the other two bars. Each time a selection is made, the pattern will print. 6. When the alignment is correct, toggle over to the draft mode. Follow the same procedure as above to align the bars in the draft mode. 7. When you complete the adjustment and turn off the printer the settings will be saved in the printer. Repair Information 22