Lexmark X264 Card Stock & Label Guide - Page 59

Lexmark E120

Get Lexmark X264 PDF manuals and user guides View all Lexmark X264 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Card stock Width: Length: Weight: 210-216 mm (8.3-8.5 in.) 279-356 mm (11-11.7 in.) Up to 220 g/m2 Card stock and label guidelines When printing on labels: • Load labels only on the multipurpose feeder. • From the printer control panel, set Paper Type to Labels in the Paper Menu. • Do not use label sheets with a slick backing material. • Do not print within 1 mm (0.04 in.) of the die-cut, the edge of the label or the perforations, or between the die-cuts. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. • Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your warranty. When printing on card stock: • From the printer control panel, set Paper Type to Card Stock. • Do not use creased card stock. It may cause paper jams. • We recommend the use of grain long card stock. Lexmark E120 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E120 supports stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels. The following table lists the maximum weights supported by Tray 1 and the manual sheet feeder. Printer specifications 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
Card stock
Width:
210–216 mm (8.3–8.5 in.)
Length:
279–356 mm (11–11.7 in.)
Weight:
Up to 220 g/m
2
Card stock and label guidelines
When printing on labels:
•
Load labels only on the multipurpose feeder.
•
From the printer control panel, set Paper Type to Labels in the Paper Menu.
•
Do
not
use label sheets with a slick backing material.
•
Do
not
print within 1 mm (0.04 in.) of the die-cut, the edge of the label or the perforations, or between the die-cuts.
•
Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam.
•
Do
not
use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive
at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your
warranty.
When printing on card stock:
•
From the printer control panel, set Paper Type to Card Stock.
•
Do
not
use creased card stock. It may cause paper jams.
•
We recommend the use of grain long card stock.
Lexmark E120
Limit label printing to occasional use of paper office labels designed for laser printers. We do
not
recommend using
vinyl or polyester labels.
The Lexmark E120 supports stocks up to 163 g/m
2
(43 lb). The automatic paper feeder can hold up to 10 sheets of card
stock or labels.
The following table lists the maximum weights supported by Tray 1 and the manual sheet feeder.
Printer specifications
59