Lexmark X466dte User's Guide - Page 164
Universal Setup menu, Custom Scan Size <x>, Units of Measure, Portrait Width, Portrait Height
View all Lexmark X466dte manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Menu item Custom Scan Size Scan Size Name Width 1-14 inches (25-355.6 mm) Height 1-14 inches (25-355.6 mm) Orientation Landscape Portrait 2 scans per side Off On Description Specifies a custom scan size name and options. This name replaces a Custom Scan Size name in the printer menus. Notes: • 8.5 inches is the US factory default setting for Width. 216 millimeters is the international factory default setting for Width. • 14 inches is the US factory default setting for Height. 356 millimeters is the international factory default setting for Height. • Landscape is the factory default setting for Orientation. • Off is the factory default setting for 2 scans per side. Universal Setup menu These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal Paper Size is a user-defined paper size setting. It is listed with the other paper size settings and includes similar options, such as support for duplex printing and printing multiple pages on one sheet. Menu item Units of Measure Inches Millimeters Portrait Width 3-14 inches 76-360 mm Portrait Height 3-14 inches 76-360 mm Description Identifies the units of measure Notes: • Inches is the US factory default setting. • Millimeters is the international factory default setting. Sets the portrait width Notes: • If the width exceeds the maximum, the printer uses the maximum width allowed. • 8.5 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. • 216 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Sets the portrait height Notes: • If the height exceeds the maximum, the printer uses the maximum height allowed. • 14 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. • 356 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Understanding printer menus 164