Lexmark X546 Card Stock & Label Guide - Page 17
Coatings, direction, Grain
View all Lexmark X546 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
For materials fed short edge first: Grain short is recommended for stock heavier than 135 g/m2 Grain long is recommended for stock lighter than 135 g/m2 Feed direction Feed direction Grain direction Grain direction For materials fed long edge first: Grain long is recommended for stock heavier than 135 g/m2 Grain short is recommended for stock lighter than 135 g/m2 Feed direction Feed direction Grain direction Grain direction See the individual printer specifications in "Printer specifications" on page 30 for more information about the recommended grain direction for card stock you use with your printer. Coatings Surface texture and coatings on card stock significantly affect toner adhesion (fuse grade), print quality, and feed reliability. We recommend a vellum finish for the best printing performance. We do not recommend glossy coatings and slick surfaces or surfaces that mimic laid finishes (glossy paper, not glossy card stock, is acceptable for some printers). Paper smoothness also affects print quality. If the paper is too rough, the toner does not fuse to the paper properly; if the paper is too smooth, it can affect feed reliability. We recommend smoothness to be between 100 and 400 Sheffield points (150-250 is optimal). Using media higher than 300 Sheffield could result in printing degradation. Card stock 17