Lexmark X642E Quick Reference - Page 1
Lexmark X642E - X642E Manual
UPC - 734646258746
View all Lexmark X642E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Lexmark™ X642 Quick Reference Loading paper and specialty media Loading standard trays and optional trays Note: Do not remove a tray when a job is printing or when the control panel green indicator light is blinking. Doing so may cause a jam. 1 Remove the tray from the MFP, and place it on a flat, level surface. 3 Squeeze the rear guide tab, and slide the guide to the correct position for the size media you are loading. 4 Flex the sheets back and forth to loosen them, then fan them. Do not fold or crease the print media. Straighten the edges on a level surface. 5 Place the print media in the tray: • Print side facedown for single-sided printing • Print side faceup for duplex printing 6 Touch Submit. 7 Touch Paper Type. 8 Touch the left or right arrow to change the media type for the desired tray. 9 Touch Submit. 10 Touch the home icon. Loading the multipurpose feeder 1 Push the release latch, and lower the multipurpose feeder. 2 Squeeze the side guide tab, and slide the guide to the outer edge of the tray. Simplex Duplex Note: Do not fill paper above the load line. Overfilling the tray may cause jams. 6 Squeeze the side guide tab, and slide the guide toward the inside of the tray until it lightly rests against the edge of the media. 7 Insert the tray into the MFP. Setting the Paper Type and Paper Size 1 Make sure the MFP is on. 2 Press Menu on the control panel. 3 Touch Paper Menu. 4 Touch Paper Size. 5 Touch the left or right arrow to change the size for the desired tray. 2 Pull the tray extension out.