Lexmark X651DE Forms and Bar Code Technical Reference - Page 91
Arguments for MaxiCode bar code symbology
UPC - 734646093729
View all Lexmark X651DE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Arguments for QR bar code symbology Key /Symbology /Units Type name name /Model name /ECC /Mode name name /ModuleSize integer Default Value /600ths /Model2 /M /Mixed 10 Definition Required (/QR); determines bar code symbology Optional; values are /300ths, /600ths, /1200ths; may be used in the calculations below Optional; values are /Model1, /Model2 (default); Determines the model of QR symbology used Optional; sets the ECC level: /L, /M, /Q, /H Optional; sets the QR encoding mode: /Numeric, / Alphanumeric, /ECI, /Byte, /Kanji, /Mixed Optional; size of module element, in /Units; minimum value supported is 1 Arguments for MaxiCode bar code symbology Key /Symbology /Mode /QuietZone Range 02-06 (dec) Default value /MaxiCode 02 (dec) Description Symbology identification 02 = Structured carrier message with numeric postal code 03 = Structured carrier message with alphanumeric postal code 04 = Standard symbol with standard error correction 05 = Full symbol with enhanced error correction 06 = Reader program with standard error correction An array of 2 numbers; has the same meaning as other bar codes. Notes Depending on the mode, the input data sent with the Transfer Bar Code Data command must follow the following rules: • For all modes, the input data must start with a label-number field and number-of-labels field. Both fields are one digit in length and are terminated with either a comma or Group Separator (GS, ASCII 29). • For modes 2 and 3, there are 3 extra fields that must follow the label fields. These include the postal code, country code, and class of service. Each field must be terminated with either a comma or GS. • A mode 2 postal code can be 0 to 9 digits. Postal codes greater than 9 digits will be truncated. For country code 840 (USA), postal codes of length 5 will be padded with 4 zeros. • A mode 3 postal code can be 0 to 6 alphanumeric characters (any printable character in code set A as defined in AIM spec). Codes longer than 6 characters will be truncated. Codes shorter than 6 characters will be padded with spaces. • The country code must be 3 digits in length, padded with leading zeros, if necessary. • The class of service must be 3 digits in length, padded with leading zeros, if necessary. Arguments for MaxiCode bar code symbology 88