Lexmark X652 User's Guide - Page 189
Location, Alarms, Timeouts
View all Lexmark X652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Menu item Location Alarms Alarm Control Cartridge Alarm Staple Alarm Timeouts Job Hold Timeout Disabled 5-255 Timeouts Standby Mode Disabled 2-240 Timeouts Power Saver Mode Disabled 2-240 Timeouts Screen Timeout 15-300 Description Specifies the location of the printer Note: The location will be stored on the Embedded Web Server. Sets an alarm to sound when the printer requires operator intervention Available selections for each alarm type are: Off Single Continuous Notes: • Single is the factory default setting for Alarm Control. Single sounds three quick beeps. • Off is the factory default setting for Toner Alarm and Staple Alarm. Off means no alarm will sound. • Continuous repeats three beeps every 10 seconds. • Staple Alarm is available only when the finisher is installed. Sets the amount of time the printer waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue Notes: • 30 seconds is the factory default setting. • This menu item appears only when a printer hard disk is installed. Specifies the number of minutes of inactivity before the system enters a lower power state Note: 15 minutes is the factory default setting. Specifies the number of minutes of inactivity before some systems begin entering a minimum power state. Notes: • 60 minutes is the factory default setting. • Power Saver does not interact with Standby Mode. Sets the amount of time in seconds the printer waits before returning the printer display to a Ready state Note: 30 seconds is the factory default setting. Understanding printer menus 189