Lexmark X652 Help Menu Pages - Page 15
Repeating defects measurements - toner cartridge
View all Lexmark X652 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Print defects guide Page 15 of 18 Print defects guide Repeating defects measurements Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best matches the defects on the print job indicates which particular part is causing the defect. Replace the charge rolls 28.3 mm (1.11 in.) Replace the transfer roller 51.7 mm (2.04 in.) Change the toner cartridge 47.8 mm or 96.8 mm (1.88 in.) (3.81 in.) Replace the fuser 88.0 mm or 95.2 mm (3.46 in.) (3.75 in.)
Print defects guide
Repeating defects measurements
Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best matches the defects
on the print job indicates which particular part is causing the defect.
Replace the charge rolls
Replace the transfer roller
Change the toner cartridge
Replace the fuser
28.3 mm
(1.11 in.)
51.7 mm
(2.04 in.)
47.8 mm
(1.88 in.)
or
96.8 mm
(3.81 in.)
88.0 mm
(3.46 in.)
or
95.2 mm
(3.75 in.)
Print defects guide
Page 15 of 18