Lexmark X746 Card Stock & Label Guide - Page 90
Lexmark W850
View all Lexmark X746 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
• We recommend the use of grain short card stock. • Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in first. Lexmark W850 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W850 supports stocks up to 216 g/m2. Always feed labels and card stock from Tray 1, 2 or the multipurpose feeder. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Paper source Tray 1 Tray 2 Multipurpose feeder Media types Paper, Labels, Transparencies Paper, Card stock, Labels, Transparencies Paper, Card stock, Envelopes, Labels, Transparencies Weight 64-105 g/m2 64-216 g/m2 64-216 g/m2 Media specifications Labels Card stock Width: 89-297 mm (3.5-11.7 in.) Length: 99-432 mm (3.9-17 in.) Weight: 64-216 g/m2 Thickness: Up to 0.25 mm Smoothness: 100-400 Sheffield* * 150-250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation. Width: 89-297 mm (3.5-11.7 in.) Length: 99-432 mm (3.9-17 in.) Weight: Up to 216 g/m2 Card stock and label guidelines When printing on labels: • Set the Paper Type to Labels from the printer driver. • Use standard-size products (either A4 or Letter). Printer specifications 90