Lexmark X792 Forms and Bar Code Card Technical Reference Guide - Page 96
Max=5 * X dimension
View all Lexmark X792 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
MicroPDF417 Key /Symbology Type name /Units name /ModuleWidth int /ModuleHeight int /Rows int /Columns int Range n/a /300ths /600ths /1200ths 240-12000 (dec) 480-60000 (dec) 4-44 (dec) 1-4 (dec) Default value n/a /600ths 945 (dec) 03 B1 (hex) 1890 (dec) 07 62 (hex) 0 (dec) 00 (hex) 0 (dec) 00 (hex) Description Required Identifies the bar code symbology (/MicroPDF417) Optional /Units is used for /ModuleWidth and /ModuleHeight calculations. Optional Sets the X dimension of the module (white or black rectangle) in 100th of an inch. To set the X dimension to default at 600 dpi requires a value of 9.45, which is specified here as 945 decimal. Note: Values beyond the defined range are appropriately clipped and set to the minimum and maximum values. Optional Sets the Y dimension of the module (white or black rectangle) in 100th of an inch. To set the Y dimension to "default" at 600 dpi requires a value of 18.9, which is specified here as 1890 decimal. Notes: • The range of Y dimension is dependent on the value of X dimension, such that, Min=2 * X dimension, and Max=5 * X dimension. • Values beyond the defined range are appropriately clipped and set to the minimum and maximum values. Optional This is an automatic operation specified by using 0. Optional This is an automatic operation specified by using 0. Arguments for MaxiCode bar code symbology 93