Lexmark X850E IPDS Printer and Host Setup Guide - Page 39
TCP/IP Settings, Parameter, Value, Activate, Ready, Menus, Network/Ports., Select, TCP/IP
UPC - 734646002790
View all Lexmark X850E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server c) Now select Tuning Options. The Job Interval Shutdown Timer indicates the number of seconds PSF/2 waits before shutting down when there are no jobs in the queue. In other words this is the amount of time that PSF/2 remains active after the last job is printed. Valid values: integers 1 to 9999 1-9998 time in seconds to wait between jobs 9999 wait indefinitely for the next job to be received. Step 4 Configure the Printer's Print Server TCP/IP Settings To enable IPDS printing with a Standard Network port or a MarkNet internal LAN print server, several settings must be verified. You can verify these settings from the printer control panel as shown below. 1 From a Ready state press the MENU button (printers) or touch (Menus on MFPs). 2 Use the navigation buttons or icons to scroll to Network/Ports. 3 Select Network/Ports. TIp: To do this on printers, press the Select button ; on MFPs just touch Network/Ports. 4 Now you will see a list of menus. Select the TCP/IP menu. 5 Use the navigation buttons or icons to scroll through the options. Check each of the following settings and change them as needed to configure TCP/IP communication. TCP/IP Settings Parameter Value Activate On (Printers: Must be "On" to enable TCP/IP communi- cations. MFPs: not displayed.) 39