Lexmark X850E User's Reference - Page 47
Solve problems receiving faxes, Problem, Solution
UPC - 734646002790
View all Lexmark X850E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Problem Data was missing When sending a large fax, scanning stalls in the middle of the scan Solution Receiving fax unit may not have automatic reduction turned on. Try resending fewer pages at once. MFP first scans all the fax pages to memory. If you do not have a hard disk installed in your printer, using high resolution settings or sending lots of pages at once can rapidly fill up the available printer memory. When the printer memory is full, MFP dials and attempts to send the fax pages already in memory. After those pages are sent, scanning resumes. If your fax fails to send correctly, you can try either sending fewer pages at once or sending them at a lower resolution. If you frequently send large faxes, or faxes requiring high resolutions, you may want to add a printer hard disk or more memory to your MFP. Solve problems receiving faxes Problem Fax was not received Fax was printed on two pages Fax quality is poor Solution Have the sender resend the fax. Make sure you have not disabled receiving. If you are attached to a network, browse to the IP address of the MarkNet N2501e and check the setting. (Hint: Setting/Configuration, Advanced Settings, and then check the Enable Receive box.) Automatic reduction is turned off. Turn automatic reduction on and have the fax resent. Have the fax sent at a higher resolution. Solve problems receiving faxes 42