Lexmark X925 Forms and Bar Code Card Technical Reference Guide - Page 27
Two-dimensional bar codes, Bar code descriptor for Codablock F
View all Lexmark X925 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Two-dimensional bar codes Bar code descriptor for Codablock F Field Name Esc (s#T Type name Range na Default (if not specified) n/a Esc Int Minimum: 16 (dec) or 10 (hex) (s#1,#2,[#3]V 3 (dec) or 03 (hex) Maximum: There is no maximum value. Int Minimum: 2 rows Maximum: 44 rows 2 (dec) or 02 (hex) Esc (s#1]B Int Minimum: 4 columns Maximum: 103 columns 20 (dec) or 14 (hex) Int Minimum: 6 (dec) or 06 (hex) Minimum value of B1 is 1, but it may be unreadable. Maximum: There is no maximum value for B1, but larger bar codes use up more memory. Description Required 24840T Optional Selects bar height bar height to 1/72" (same units as fonts) Note: Values from 0 to 2 are the same as the default. Optional for Forms and Bar Code Card, required for HP BarDIMM. (See "Deviations" chapter) Requested number of rows in the Codablock F symbol. Optional Requested number of columns in the Codablock F symbol Optional Selects bar width HP BarDIMM deviations: The HP BarDIMM Pro uses the PCL 5 height command V1 to specify the single line bar height of the Codablock F bar code, such as the height of one of the rows contained in the bar code. No provision is made to specify the absolute height of the Codablock F symbol. Parameters V2 and V3 are derived from the ELMICRON specification. In the HP BarDIMM Pro specification, the Codablock V parameter #1 is the single line bar height in 1/ 60", but it is actually in 1/72". Two-dimensional bar codes 24