Home » Lexmark Manuals » Multifunction Devices » Lexmark X950 » Manual Viewer

Lexmark X950 IPDS Emulation User's Guide - Page 28

Instruction CC, 3.4.13 Remove User Files, Ignore, User CMYK Profile, User HL Table - default password

Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

3.4.12.2 Instruction CC CC CMRs contains ICC profiles (in their ICCdefined syntax) that convert a device-specific color to/from the device-independent ICC Profile Connection Space (PCS). Use* Ignore Use the IPDS CMOCA instruction CC CMR. If no applicable CMR exist, the IPDS uses the default User Destination Profile. If the User Destination Profile option is set to Ignore or no User Destination Profile is present in the printer, the IPDS uses a build-in output profile adapted for the specific printer model as the default output profile. Ignore the IPDS CMOCA instruction CC CMR. The IPDS will use the default User Destination Profile. If the User Destination Profile option is set to Ignore or no User Destination Profile is present in the printer, the IPDS uses a built-in output profile adapted for the specific printer model as the default output profile. Refer to section 6 Color Management - User Files on page 65 for more information on uploading user files. Note: CMOCA feature is available on the following printers: Lexmark C950, Lexmark X950, X952, X954, and Lexmark X548. Note: CMOCA feature is available on the EC1.1 (and above) firmware releases of the following printers: Lexmark C792, Lexmark C925, Lexmark X792, and Lexmark X925. 3.4.13 Remove User Files This function is used for the removal of color management files uploaded by the user through the printer web interface and stored on a disk, user flash or the flash of the IPDS Card. If attempting to erase resources on a copy protected storage media, the operation will fail with a front panel message to the user. Remove the password protection to allow removal of the files. All Remove all user files, stored on any media. User CMYK Profile Remove all user CMYK profile files. User RGB Profile Remove all user RGB profile files. User Dest. Profile Remove all user Destination profile files. User HL Table Remove all user Highlight Mapping Table files. User OCA Table Remove all user OCA Mapping Table files. 28

Section	Page
Introduction	7
1.1 About This Guide	7
1.2 Equipment Requirements and Specifications for IPDS Emulation Printing	7
1.3 Customer Support	8
1.4 Conventions Used in the Manual	9
2 Using the Control Panel for IPDS MENU Setup	10
2.1 IPDS MENU Setup Options vs. Printer Setup Options	10
2.2 Activation of New Menu Settings	10
2.3 Accessing the IPDS MENU	10
2.4 Printing the Menu Settings Page	10
3 Setup Operations Reference	12
3.1 IPDS MENU - Map of All Options	12
3.2 IPDS MENU – Default Values Overview	13
3.2.1 Emulation	13
3.2.2 Color Menu	13
3.2.3 Paper Handling	13
3.2.4 MAP Input Trays	14
3.2.5 Map Output Bins	14
3.2.6 Margins	14
3.2.7 Resource Capture	14
3.3 EMULATION – Options Descriptions	15
3.3.1 IPDS Emulation	15
3.3.2 Host Resolution	15
3.3.3 Color Processing	16
3.3.4 Toner Saver	16
3.3.5 BAR CODE	16
3.3.5.1 Bar Code Symbol	16
3.3.5.2 Bar Code Size	17
3.3.6 DEFAULT CODEPAGE	17
3.3.7 Codepage Version	18
3.3.8 DEFAULT FGID	18
3.3.9 Default CPI	18
3.3.10 Printable Area	18
3.3.11 Exception Control	19
3.3.12 Font Control	20
3.3.13 Font Style	20
3.3.14 IPDS Print Res	20
3.3.15 Intervention Required	21
3.3.16 IPDS Timeout	21
3.3.17 Fax Interrupt	22
3.3.18 Print Resource List	23
3.3.19 Trace Functions	23
3.3.20 IPDS Version	23
3.4 COLOR MENU – Options Descriptions	24
3.4.1 Color Management	24
3.4.2 User CMYK Profile	24
3.4.3 User RGB Profile	24
3.4.4 User Dest. Profile	25
3.4.5 RGB Grey to K	25
3.4.6 Preserve Black	25
3.4.7 Black Point Comp	25
3.4.8 Embedded ICC Prof	25
3.4.9 HL Mapping Table	26
3.4.10 OCA Mapping Table	26
3.4.11 DEF REND INTENT	27
3.4.12 CMOCA Options	27
3.4.12.1 CMOCA Options	27
3.4.12.2 Instruction CC	28
3.4.13 Remove User Files	28
3.5 PAPER HANDLING Menu – Option Descriptions	29
3.5.1 Offset Stacking	29
3.5.2 UNIVERSAL SIZE	29
3.5.3 OTHER ENV SIZE	31
3.6 MAP INPUT TRAYS Menu Options	33
3.7 MAP OUTPUT BINS Menu Options	36
3.7.1 Descriptions of Output Bin Values	36
3.7.2 Descriptions of IPDS Bin Selection Numbers	37
3.7.3 Default Bin Mapping	37
3.8 MARGINS Menu Options	38
3.8.1 ALL INPUT TRAYS	40
3.8.2 TRAY 1 ADJUST	40
3.8.3 TRAY 2 ADJUST	40
3.8.4 TRAY 3 ADJUST	41
3.8.5 TRAY 4 ADJUST	41
3.8.6 TRAY 5 ADJUST	42
3.8.7 MP FEEDER ADJUST	42
3.8.8 MANUAL PAPER ADJ	43
3.8.9 MANUAL ENV ADJ	43
3.9 RESOURCE CAPTURE Menu Options	44
3.9.1 Capture Media	44
3.9.2 Capture Fonts	45
3.9.3 Capture Data Objects	45
3.9.4 Capture CMR Objects	45
3.9.5 Remove Resources	45
4 Duplex Printing Using Preprinted Media	47
5 Finishing Support	48
5.1 Offset Stacking	50
5.1.1 AS/400 and iSeries Offset Stacking	50
5.1.2 Mainframe Offset Stacking	51
5.2 Stapling	53
5.2.1 AS/400 and iSeries Stapling	53
5.2.1.1 Lexmark C792, Lexmark X792 and Lexmark 6500e Optional Finisher	54
5.2.1.2 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Standard Finisher	55
5.2.1.2.1 Corner Staple	55
5.2.1.2.2 Dual Staple (IPDS Edge stitch with 2 staples)	56
5.2.1.2.3 Double Dual Staple (IPDS Edge stitch with four staples)	57
5.2.1.3 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Advanced Finisher Functions	58
5.2.1.3.1 Center Fold (IPDS Center Fold-in)	58
5.2.1.3.2 Saddle Staple (IPDS Saddle stitch-in)	58
5.3 Mainframe Stapling	60
5.3.1.1 Lexmark C792, Lexmark X792 and Lexmark 6500e Optional Finisher	60
5.3.1.2 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Standard Finisher	61
5.3.1.3 Lexmark C950, Lexmark X950, Lexmark X952 and Lexmark X954 Optional Advanced Finisher Functions	62
5.3.1.3.1 Saddle Staple (IPDS Saddle stitch-in)	62
5.4 Hole Punch	63
5.4.1 Hole Punch From an Input Source	63
5.4.2 Hole Punch to an Output Bin	64
6 Color Management – User Files	65
6.1 Types of User Files:	65
6.2 Managing User Color files	66
6.2.1 Uploading a User Color file to the Printer	66
6.2.2 Delete a User File	67
7 IPDS Job Cancel	68
7.1 Canceling IPDS Jobs	68
7.2 How to Cancel a Job	68
8 Working with Captured Resources	69
8.1 Capture Resource and Remove Resources	69
8.2 Preparing Fonts for Capture	69
8.2.1 Capturing Fonts from an AS/400 or iSeries	70
8.2.1.1 Enabling Font Capture on the Printer	70
8.2.1.2 Program Requirements	70
8.2.1.3 Making Bitmap LF1 and Outline LF3 font Fonts Eligible for Capture on an iSeries host	70
8.2.1.4 Making TrueType Fonts eligible for Capture on an iSeries host	70
8.2.2 Capturing Fonts from a Mainframe Host	71
8.2.2.1 Enabling Font Capture on the Printer	71
8.2.2.2 Mainframe Program Requirements	71
8.2.2.3 Making Bitmap LF1 and Outline LF3 font Fonts Eligible for Capture on a Mainframe	71
8.2.2.4 Making TrueType Fonts eligible for Capture on mainframe	74
8.3 Preparing Data Objects (non-font resources) for Capture	74
8.3.1 Capturing Data Objects from an IBM Host	74
8.3.1.1 Enabling Data Object Capture on the Printer	74
8.3.1.2 Making Data Objects Eligible for Capture on the Host	74
8.4 Preparing CMOCA Resources for Capture	74
9 Remote Configuration of Printer IPDS Settings	76
9.1 Why Use a Browser	76
9.2 Remote Configuration Using a Browser	76
9.3 Functions that Can Not be Operated Remotely	77
9.4 Functions that Can ONLY be Operated Remotely	77
10 Printer Messages and Problems	78
11 Command Reference	79
11.1 XOA Print Quality Control	79
11.2 XOH OPC Product Identifier Self Defining Field	80
11.3 Finishing Operations Self-Defining Field	81
11.4 N-up Printing	82
11.5 Color and Simulated Grey Scale Printing	82
11.6 TrueType/OpenType Fonts	82
11.7 Object Container Support	82
11.8 Media Reporting by Object ID (OID)	83

Match case Limit results 1 per page

3.4.12.2 Instruction CC

CC CMRs contains ICC profiles (in their ICCdefined syntax) that convert a device-specific color to/from

the device-independent ICC Profile Connection Space (PCS).

Use*

Use the IPDS CMOCA instruction CC CMR. If no applicable CMR exist, the

IPDS uses the default User Destination Profile. If the User Destination Profile

option is set to Ignore or no User Destination Profile is present in the printer, the

IPDS uses a build-in output profile adapted for the specific printer model as the

default output profile.

Ignore

Ignore the IPDS CMOCA instruction CC CMR. The IPDS will use the default

User Destination Profile. If the User Destination Profile option is set to Ignore or

no User Destination Profile is present in the printer, the IPDS uses a built-in

output profile adapted for the specific printer model as the default output profile.

Refer to section 6 Color Management – User Files on page 65 for more information on uploading user

files.

Note:

CMOCA feature is available on the following printers: Lexmark C950, Lexmark X950, X952,

X954, and Lexmark X548.

Note:

CMOCA feature is available on the EC1.1 (and above) firmware releases of the following printers:

Lexmark C792, Lexmark C925, Lexmark X792, and Lexmark X925.

3.4.13 Remove User Files

This function is used for the removal of color management files uploaded by the user through the printer

web interface and stored on a disk, user flash or the flash of the IPDS Card.

If attempting to erase resources on a copy protected storage media, the operation will fail with a front

panel message to the user. Remove the password protection to allow removal of the files.

All

Remove all user files, stored on any media.

User CMYK Profile

Remove all user CMYK profile files.

User RGB Profile

Remove all user RGB profile files.

User Dest. Profile

Remove all user Destination profile files.

User HL Table

Remove all user Highlight Mapping Table files.

User OCA Table

Remove all user OCA Mapping Table files.