Lexmark X950 Technical Reference - Page 17

PostScript (PS) emulation 17 • If the requested size and the size loaded in the active source do not match, then the sources are searched in the order defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary. • If the requested media size is not found by the previous search, then the following search order is used: - Envelope feeder - Multipurpose feeder • If the requested size and type are not available from any automatic source, then you are prompted to load the requested envelope size and type in the manual feed source. • If the size is still not available, then a configurationerror is issued and the print job is flushed. If manualfeed or ManualFeed is true, then the printer prompts you to load the requested size manually. If no manual feed exists on the printer, then a rangecheck error message is issued. The envelope tray the printer selects when it receives an envelopetray operator is listed in "Envelopetray operator selections" on page 17. These operators are equivalent to executing the following PostScript emulation sequence: setpagedevice where x y are the PageSize in points. Envelopetray operator selections = Supported X = Not supported Tray operators Operator 110x220envelopetray dlenvelopetray 162x229envelopetray c5envelopetray 176x250envelopetray b5envelopetray 3.875x7.5envelopetray monarcenvelopetray 3.875x8.875envelopetray 4.125x9.5envelopetray com10envelopetray otherenvelopetray Tray selected (Corresponding image size is set) tray with 110 x 220 size envelopes tray with 110 x 220 size envelopes tray with 162 x 229 size envelopes tray with 162 x 229 size envelopes tray with 176 x 250 size envelopes tray with 176 x 250 size envelopes tray with 3.875 x 7.5 size envelopes tray with 3.875 x 7.5 size envelopes tray with 3.875 x 8.875 size envelopes tray with 4.125 x 9.5 size envelopes tray with 4.125 x 9.5 size envelopes tray with other size envelopes Printer models C950 X950, X952, X954 X X X X X X