Lexmark X954 Forms and Bar Code Card Technical Reference Guide - Page 94
Arguments for MaxiCode bar code symbology
View all Lexmark X954 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Arguments for QR bar code symbology Key /Symbology Type name /Units name /Model name /ECC /Mode name name /ModuleSize integer Default Value - /600ths /Model2 /M /Mixed 10 Definition Required Identifies the bar code symbology (/QR) Optional Valid values are /300ths, /600ths, /1200ths Optional This determines the model of QR symbology used. Valid values are /Model1, /Model2 (default). Optional Sets the ECC level to /L, /M, /Q, /H Optional Sets the QR encoding mode to /Numeric, /Alphanumeric, /ECI, /Byte, /Kanji, /Mixed Optional Sets the size of the module element in /Units. The minimum value supported is 1. Arguments for MaxiCode bar code symbology Key /Symbology /Mode /QuietZone Range - 02-06 (dec) - Default value /MaxiCode 02 (dec) - Description Identifies the bar code symbology 02 = Structured carrier message with numeric postal code 03 = Structured carrier message with alphanumeric postal code 04 = Standard symbol with standard error correction 05 = Full symbol with enhanced error correction 06 = Reader program with standard error correction Sets the quiet zone in an array of two numbers Notes: Depending on the mode, the input data sent with the Transfer Bar Code Data command must follow these rules: • For all modes, the input data must start with a label-number and number-of-labels field. Both fields are one digit in length and are terminated with either a comma or Group Separator (GS, ASCII 29). • For modes 2 and 3, the postal code, country code, and class of service fields must follow the label fields. Each field must be terminated with either a comma or GS. Arguments for MaxiCode bar code symbology 91