Lexmark XC2130 Card Stock & Label Guide - Page 83
Printer specifications, Depending on construction
View all Lexmark XC2130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Printer specifications 83 Note: Scanning labels through the ADF is not recommended. Card stock1 Labels Paper source Standard and optional 250‑ and 550‑sheet trays Index Bristol 199 g/m2 Tag 203 g/m2 Cover 176 g/m2 Paper 180 g/m2 Dual‑web paper 180 g/m2 Multipurpose feeder2 199 g/m2 203 g/m2 176 g/m2 180 g/m2 180 g/m2 1 See "Grain orientation" on page 17 for specific recommendations. 2 Due to label design characteristics, unacceptable feeding may be experienced from the multipurpose feeder. Labels Card stock Thickness: 0.102-0.305 mm (0.004-0.012 in.) Smoothness: 100-400* Sheffield * 150-250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation. Weight: Up to 199 g/m2 Index Bristol (110 lb) Up to 203 g/m2 Tag (125 lb) Up to 176 g/m2 Cover (65 lb) Card stock and label guidelines Tray fill line information Depending on construction, labels and card stock can sometimes be difficult to pick and feed reliably. Performance can be improved by controlling the number of sheets of media loaded in the tray. There are two fill lines in the tray. The solid line is the maximum paper fill indicator. No media should be loaded in the tray above this line or paper jams could occur. The dashed line is the alternate paper fill indicator and should be used if any feed or reliability issues are noted with specialty media, including labels and card stock. If paper jams occur when completely filling the tray, load the specialty media only up to the alternate paper fill indicator.