Lexmark XC9335 Users Guide - Page 40

Set up, install, and configure 40 Printer model XC9335 Analog fax1 etherFAX2 Fax server Fax over IP (FoIP)3 1 Needs an installed fax card. For more information, contact the place where you purchased the printer. 2 Needs a subscription. For more information, go to https://www.etherfax.net/lexmark or contact the place where you purchased the printer. 3 Needs an installed license bundle. For more information, contact the place where you purchased the printer. Setting up the fax function using analog fax Notes: • A fax card must be installed for the printer to use analog fax. • Some connection methods are applicable only in some countries or regions. • If the fax function is enabled and not fully set up, then the indicator light may blink red. • If you do not have a TCP/IP environment, then use the control panel to set up fax. Warning-Potential Damage: To avoid loss of data or printer malfunction, do not touch cables or the printer in the area shown while actively sending or receiving a fax. Using the Settings menu in the printer 1 From the home screen, touch Settings > Fax > Fax Setup > General Fax Settings. 2 Configure the settings. Using the Embedded Web Server 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.