Lexmark XC9335 Quick Reference - Page 5
Fax, Setting up the printer to fax, Setting up the fax function using analog fax
View all Lexmark XC9335 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2 From the computer, open Windows Fax and Scan. 3 From the Source menu, select a scanner source. 4 If necessary, change the scan settings. 5 Scan the document. For Macintosh users Note: Make sure that the printer is added to the computer. For more information, see "Adding printers to a computer" on page 19. 1 Load an original document into the automatic document feeder or on the scanner glass. 2 From the computer, do either of the following: • Open Image Capture. • Open Printers & Scanners, and then select a printer. Click Scan > Open Scanner. 3 From the Scanner window, do one or more of the following: • Select where you want to save the scanned document. • Select the size of the original document. • To scan from the ADF, select Document Feeder from the Scan Menu or enable Use Document Feeder. • If necessary, configure the scan settings. 4 Click Scan. Fax Setting up the printer to fax Setting up the fax function using analog fax Notes: • A fax card must be installed for the printer to use analog fax. • Some connection methods are applicable only in some countries or regions. • If the fax function is enabled and not fully set up, then the indicator light may blink red. • If you do not have a TCP/IP environment, then use the control panel to set up fax. Warning-Potential Damage: To avoid loss of data or printer malfunction, do not touch cables or the printer in the area shown while actively sending or receiving a fax. Using the Settings menu in the printer 1 From the home screen, touch Settings > Fax > Fax Setup > General Fax Settings. 2 Configure the settings. Using the Embedded Web Server 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Settings > Fax > Fax Setup > General Fax Settings. 3 Configure the settings. 4 Apply the changes. Setting up the fax function using fax server Notes: • This feature lets you send fax messages to a fax service provider that supports e‑mail receiving. • This feature supports outgoing fax messages only. To support fax receive, make sure that you have a device‑based fax, such as analog fax, etherFAX, or Fax over IP (FoIP), configured in your printer. 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Settings > Fax. 3 From the Fax Mode menu, select Fax Server, and then click Save. 4 Click Fax Server Setup. 5 In the To Format field, type [#]@myfax.com, where [#] is the fax number and myfax.com is the fax provider domain. Notes: • If necessary, configure the Reply Address, Subject, or Message fields. • To let the printer receive fax messages, enable the device‑based fax receive setting. Make sure that you have a device‑based fax configured. 6 Click Save. 7 Click Fax Server E‑mail Settings, and then do either of the following: • Enable Use E‑mail SMTP Server. Note: If the E‑mail SMTP settings are not configured, then see "Configuring the e‑mail SMTP settings" on page 1. • Configure the SMTP settings. For more information, contact your e‑mail service provider. 8 Apply the changes. 5