Lexmark XC9455 Printer Option and Stand Compatibility Guide - Page 53
Option, Placement, Table, or desktop, Swivel, cabinet, Floor, Caster, Adjustable, printer stand
View all Lexmark XC9455 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Supported maximum configurations 53 Placement Option Table or desktop Swivel cabinet Floor3 Caster base4, 6 Adjustable printer stand4 2100‑sheet tray2, 6 N/A N/A N/A 1 N/A Caster base4 N/A N/A 1 N/A N/A Adjustable printer stand4, 7 N/A N/A 1 N/A N/A Swivel cabinet 1 N/A 1 N/A N/A 1 This tray can be configured with other optional trays in any order. 2 Only one optional 250‑ or 550‑sheet tray can be used when installing the 2100‑sheet tray. Place the 2100‑sheet tray at the bottom of the configuration. 3 When placing the configuration on the floor, only one optional 250-sheet tray can be used with one optional 550sheet tray or spacer. 4 When placing the configuration on the caster base or adjustable printer stand, follow these maximum configuration instructions. If using three optional 550‑sheet trays or spacers, no optional 250‑sheet tray can be used. If using two 550‑sheet trays or spacers, only one 250‑sheet tray can be used. If using one 550‑sheet tray or spacer, up to three 250‑sheet trays can be used. 5 When using a spacer, install it first, and then install any optional trays above it. Do not install the spacer with the 2100‑sheet tray. 6 The 2100‑sheet tray requires the use of the caster base. 7 For more information on supported configurations, see "Adjustable printer stand 40C2300" on page 89. Printer output options, maximum configurations, and placement Placement Option Table or desktop Swivel cabinet Floor Caster base Adjustable printer stand 4‑bin mailbox1, 4 3 3 3 3 3 Output expander1, 2, 4 High capacity output 1 1 1 1 1 expander2, 3 Staple finisher5 1 1 1 1 1 Staple, hole punch 1 1 1 1 1 finisher6 1 The 4-bin mailboxes and output expanders can be installed in any order. 2 A single output expander is the only option that can be placed on top of the high capacity output expander. 3 No other output option may be installed below the high capacity output expander. 4 When used with a staple finisher, place this option below it. 5 The staple finisher is always on top of the configuration. An additional 4‑bin mailbox or output expander may be installed below it. 6 Do not use the staple, hole punch finisher with any other output options.