Lexmark XC9455 Printer Languages and Interfaces Technical Reference - Page 10
PCL emulation commands, PCL emulation commands by function
View all Lexmark XC9455 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Printer Control Language (PCL) emulation 10 PCL emulation commands PCL emulation commands by function PCL emulation commands by function (number of copies, printing, offset registration, unit of measure) Command / Parameters Function / Result ESCE Printer Reset • Prints any partial pages. • Resets printer settings to their factory defaults. • Deletes all temporary downloaded resources. ESC&d#A Number of Collated Copies Where: Turns off collation of pages or sets the number of collated # = number of collated copies. You can collate copies. up to 999 copies. Note: 0 turns off the collation. ESC&l#X Number of Copies Where: Affects the page currently in process and subsequent pages. # = number of copies (1 to 32767). 1 is the factory default value. ESC&l#S Assign any of the following numbers: • 0-Single‑Sided (default) • 1-Duplex long‑edge binding • 2-Duplex short‑edge binding • 100-Manual duplex first sides • 101-Manual duplex second sides Simplex/Duplex Print Long- or short-edge binding refers to the side of the physical page where binding occurs. ESC&l#U Where: # = number of decipoints. 1 decipoint is equal to 1/720 inch. 0 is the factory default value. Range = -32767 to 32767 Long-Edge Offset Registration Also known as Left Offset, this command adjusts the placement of logical page along the width of the physical page. ESC&l#Z Where: # = number of decipoints. 1 decipoint is equal to 1/720 inch. 0 is the factory default value. Range = -32767 to 32767 Short-Edge Offset Registration Also known as Top Offset, this command adjusts the placement of logical page along the length of the physical page.