Lexmark XC9465 Printer Languages and Interfaces Technical Reference - Page 50
setting for QTY. If Collation, Collated Copies QTY is
View all Lexmark XC9465 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Printer job language 50 Variable PERSONALITY • PCL • POSTSCRIPT • AUTO POWERSAVE • ON • OFF POWERSAVETIME • 0 to 240 PRINTEXPRESSMODE • ON • OFF QTY • 0 to 999 REPRINT • ON • OFF • AUTO Function SmartSwitch settings Sleep Mode Switch Description/notes Notes: • AUTO is the factory default setting. • This setting controls the SmartSwitch settings for the interface link on which the PJL command is received. If AUTO is sent, then both PS SmartSwitch and PCL SmartSwitch menu settings are set to ON. • If PCL is sent, then PS SmartSwitch is set to OFF and PCL SmartSwitch is set to ON. • If POSTSCRIPT is sent, then PCL SmartSwitch is set to OFF and PS SmartSwitch is set to ON. • When queried, AUTO is returned if both SmartSwitch settings are ON. If one SmartSwitch setting is OFF, then the printer language whose SmartSwitch setting is ON is returned. If both SmartSwitch settings are OFF, then the default language is returned. Note: ON is the factory default setting. This setting enables the power‑saving feature. Power Save time (in minutes) Express Printing Notes: • 20 is the factory default setting. This setting sets the time the printer remains idle before it enters Power Saver mode when POWERSAVE is On. • If a SET or DEFAULT command specifies a value greater than 120 or 240, then the value is changed to 120 or 240 depending on the printer model. Note: ON is the factory default setting. Collation ‑ Collated Copies (QTY) Jam Recovery Notes: • This setting sets the number of collated copies of a print job. 0 is the factory default setting. • If Collation ‑ Collated Copies (QTY) is not equal to 0, then a DINQUIRE or INQUIRE returns the numerical setting for QTY. If Collation ‑ Collated Copies (QTY) is set to Off, then a DINQUIRE or INQUIRE returns 0. • If a SET or DEFAULT command specifies a value greater than 999, then the value is changed to 999. Note: AUTO is the factory default setting.