Lexmark XM1246 Product Information Guide - Page 13

Environmental information 13 MX331 MX431adn Model Print 530 W 580 W Copy 550 W 600 W Operating mode Scan Ready Sleep Hibernate Off 13 W 6.5 W 0.8 W N/A 0.1 W 14 W 7 W 0.9 W N/A 0.1 W MX721, XM5365 800 W 830 W 75 W 31 W 1.7 W 0.2 W 0.2 W MX725 810 W 870 W 158 W 124 W 1.6 W 0.1 W 0.1 W MX822, XM7355 690 W 750 W 84 W 36.5 W 1.8 W 0.2 W 0.2 W MX826, XM7370 850 W 900 W 86 W 35 W 2.9 W 0.2 W 0.2 W XM1246 620 W 630 W 20 W 14.5 W 1.4 W 0.1 W 0.1 W The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average. Values are subject to change. Go to www.lexmark.com for current values. Sleep Mode This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout. Factory default Sleep Mode Timeout for this product (in minutes): MS725 and MX725: 5 All other models: 15 By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120 minutes. If the print speed is less than or equal to 30 pages per minute, then you can set the timeout only up to 60 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy. Hibernate Mode This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in Hibernate Mode, all other systems and devices are powered down safely. The Hibernate mode can be entered in any of the following methods: • Using the Hibernate Timeout • Using the Schedule Power modes Factory default Hibernate Timeout for this product in all countries or regions 3 days The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified between one hour and one month. Off mode If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the electrical outlet.