Lexmark XM3150 Card Stock & Label Guide - Page 151
Optra plus, 4039, 4029, 4019, WinWriter 600 printers
View all Lexmark XM3150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Printer specifications 151 Media specifications Labels Width: Length: Weight: Card stock Smoothness: Width: Length: Weight: 140-320 mm (5.5-12.6 in.) 182-457 mm (7.2-18 in.) 60-256 g/m2 100-200 Sheffield 140-320 mm (5.5-12.6 in.) 182-457 mm (7.2-18 in.) 60-256 g/m2 Card stock and label guidelines When printing on labels: • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the labels loaded in the tray. • Do not use label sheets with a slick backing material. • Do not print within 1 mm (0.04 in.) of the die‑cut, the edge of the label or the perforations, or between the die‑cuts. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and toner cartridge warranties. When printing on card stock: • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the card stock loaded in the tray. • Do not use creased card stock. It may cause paper jams. • We recommend the use of grain long card stock. Optra plus, 4039, 4029, 4019, WinWriter 600 printers The following table lists the maximum weights supported by each of the special card stock and label trays, as well as the manual feed tray.