Lexmark XS734 Card Stock & Label Guide - Page 61
cut, the edge of the label or the perforations, or between the die
![]() |
View all Lexmark XS734 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Printer specifications 61 Labels Card stock Width: 210-216 mm (8.3-8.5 in.) Length: 279-356 mm (11-11.7 in.) Weight: 120-128 g/m2 Thickness: 0.13-0.20 mm (0.005-0.008 in.) Smoothness: 100-400 Sheffield* * 150-250 Sheffield is optimal. Using media higher than 300 Sheffield could result in print quality degradation. Width: 210-216 mm (8.3-8.5 in.) Length: 279-356 mm (11-11.7 in.) Weight: Up to 220 g/m2 Card stock and label guidelines When printing on labels: • Load labels only on the multipurpose feeder. • From the printer control panel, set Paper Type to Labels in the Paper Menu. • Do not use label sheets with a slick backing material. • Do not print within 1 mm (0.04 in.) of the die‑cut, the edge of the label or the perforations, or between the die‑cuts. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. • Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your warranty. When printing on card stock: • From the printer control panel, set Paper Type to Card Stock. • Do not use creased card stock. It may cause paper jams. • We recommend the use of grain long card stock.
![](/manual_guide/products/lexmark-cs748de-card-stock-label-guide-680d3c1/61.png)