Lexmark XS736 Card Stock & Label Guide - Page 50
Print material, Range or maximum weight supported, sheet tray and optional, sheet drawer
View all Lexmark XS736 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Printer specifications 50 Print material Paper1 (grain direction2) Xerographic or business paper Card stock (grain long2) Index Bristol Tag Cover Range or maximum weight supported 500‑sheet tray and optional 500‑sheet drawer 60-176 g/m2 (16-47 lb bond) Multipurpose feeder 60-176 g/m2 (16-47 lb bond) 163 g/m2 (90 lb) 163 g/m2 (90 lb) 163 g/m2 (100 lb) 163 g/m2 (100 lb) 176 g/m2 (65 lb) 176 g/m2 (65 lb) Card stock (grain short2) Index Bristol Tag 199 g/m2 (110 lb) 203 g/m2 (125 lb) 199 g/m2 (110 lb) 203 g/m2 (125 lb) Cover 216 g/m2 (80 lb) 216 g/m2 (80 lb) Labels Paper 180 g/m2 (48 lb bond) 199 g/m2 (53 lb bond) Dual‑web paper 180 g/m2 (48 lb bond) 199 g/m2 (53 lb bond) Vinyl3 300 g/m2 (92 lb liner) 260 g/m2 (78 lb liner) Polyester 220 g/m2 (59 lb bond) 220 g/m2 (59 lb bond) Integrated forms Pressure‑sensitive area4 140-175 g/m2 140-175 g/m2 Paper base (grain long) 75-135 g/m2 (20-36 lb bond) 75-135 g/m2 (20-36 lb bond) 1 Paper less than 75 g/m2 is supported only when the relative humidity is less than 60% and is not supported in duplex. 2 See "Grain orientation" on page 17 for specific recommendations. 3 Vinyl labels are supported only when printing environment and media are 20-32°C (68-90°F). 4 Pressure‑sensitive area must enter the printer first. For paper and transparency specifications, see the printer publications CD. The following table indicates the paper sizes each tray supports. Labels Thickness: 0.102-0.305 mm (0.004-0.012 in.) Smoothness: 50-300 Sheffield* * 50-150 Sheffield is optimal. This printer may support labels with smoothness of less than 50 Sheffield such as coated paper, polyester, vinyl, or other synthetic facestock papers.Using media higher than 200 Sheffield could result in printing degradation. Card stock and label guidelines Labels are one of the most difficult print materials for laser printers. A fuser equipped with a web oiler may be required for label applications to optimize feed reliability. Contact your local service representative for ordering information. If you print large quantities of labels or other glossy print media, replace the fuser housing with a web oiler (P/N 56P1555 for a 115 V printer or P/N 56P1556 for a 220 V printer).