Lexmark XS738 Card Stock & Label Guide - Page 146
Lexmark X950
View all Lexmark XS738 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Printer specifications 146 • Do not print within 1 mm (0.04 in.) of the die-cut, the edge of the label or the perforations, or between the die- cuts. • Use full label sheets. Partial sheets may cause labels to peel off during printing and result in a paper jam. • Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your warranty. When printing on card stock: • Use grain long card stock, and set the paper type to Card Stock. • Do not use creased card stock. It may cause paper jams. Lexmark X950 Limit label printing to occasional use of A4‑ or letter‑size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark X950 supports card stock up to 300 g/m2. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Labels Card stock Trays 1-4 60-256 g/m2 60-256 g/m2 Multipurpose feeder 60-300 g/m2 60-300 g/m2 High‑capacity feeder 60-216 g/m2 60-216 g/m2 Labels Card stock Width: Length: Weight: Smoothness: Width: Length: Weight: 140-320 mm (5.5-12.6 in.) 182-457 mm (7.2-18 in.) 60-256 g/m2 100-200 Sheffield 140-320 mm (5.5-12.6 in.) 182-457 mm (7.2-18 in.) 60-256 g/m2