Lexmark XS796de Card Stock & Label Guide - Page 48
Universal sizes, Print material
View all Lexmark XS796de manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Printer specifications 48 Range or maximum weight supported Print material Card stock (grain short2) Index Bristol Tag 500‑sheet tray and optional 500‑sheet drawer Multipurpose feeder 199 g/m2 (110 lb) 199 g/m2 (110 lb) 203 g/m2 (125 lb) 203 g/m2 (125 lb) Cover 216 g/m2 (80 lb) 216 g/m2 (80 lb) Labels Paper 180 g/m2 (48 lb bond) 199 g/m2 (53 lb bond) Dual‑web paper 180 g/m2 (48 lb bond) 199 g/m2 (53 lb bond) Vinyl3 300 g/m2 (92 lb liner) 260 g/m2 (78 lb liner) Polyester 220 g/m2 (59 lb bond) 220 g/m2 (59 lb bond) Integrated forms Pressure‑sensitive area4 Paper base (grain long) 140-175 g/m2 75-135 g/m2 (20-36 lb bond) 140-175 g/m2 75-135 g/m2 (20-36 lb bond) 1 Paper less than 75 g/m2 is supported only when the relative humidity is less than 60% and is not supported in duplex. 2 See "Grain orientation" on page 17 for specific recommendations. 3 Vinyl labels are supported only when printing environment and media are 20-32°C (68-90°F). 4 Pressure‑sensitive area must enter the printer first. For paper and transparency specifications, see the Lexmark C752 Publications CD. The following table indicates the paper sizes each tray supports. Standard sizes (width x length) Universal sizes (width x length) Source Minimum Maximum Minimum Maximum Standard tray 500‑sheet drawer 148 x 210 mm (5.83 x 8.27 in.) 215.9 x 355.6 mm (8.5 x 14 in.) 139.7 x 210 mm (5.5 x 8.27 in.) 215.9 x 355.6 mm (8.5 in. x 14 in.) Multipurpose feeder* 148 x 210 mm (5.83 x 8.27 in.) 215.9 x 355.6 mm (8.5 x 14 in.) 69.85 x 127 mm (2.75 in. x 5 in.) 229 x 355.6 mm (9.01 x 14 in.) * If you load paper that is narrower than 148 mm (5.83 in.) in the multipurpose feeder (for example, 3 x 5‑inch index cards), set the MP Feeder Size menu item to Universal. Labels Thickness: 0.102-0.305 mm (0.004-0.012 in.) Smoothness: 100-400* Sheffield * 150-250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation. Card stock and label guidelines Labels are one of the most difficult print materials for laser printers. A fuser equipped with a web oiler may be required for label applications to optimize feed reliability. Contact your local service representative for ordering information. If you print large quantities of labels or other glossy print media, replace the fuser housing with a web oiler (P/N 56P1555 for a 115 V printer or P/N 56P1556 for a 220 V printer).